1.
The girls were no less spectacular and each successful deflection, dodge, duck, leap, handspring, or somersault gradually brought them nearer to each other in order to unite their force and neutralize the near invisible staff that Harry wielded like a master
2.
They ranged over the roadway from one side to the other, the ladies executing with expert precision each posture, block, deflection, and duck
3.
Mortals from Earth could be here by 2400,” Alfred said, "even sooner if dust deflection continues to improve
4.
Kay laughed with mirth, and then Leland began his attacks in earnest, and she lost herself in the thrill of deflection, attack, and counter-attack under the darkening sky, billowing grey clouds beginning to slide in from the east
5.
A deflection for a high attack
6.
concern that wave deflection from the breakwater wall could increase the wave size,
7.
The deflection caused it to scream past, colliding
8.
Coriolis force: the deflection of wind and water caused by the earth"s rotation
9.
This time the blow was delivered as his teacher approached from Barrad’s right making it difficult to angle its deflection
10.
Tiamat’s heads writhed in confusion over the deflection of her multiple-chemical attack
11.
We have measured a slight deflection in the comet’s trajectory
12.
He opened up the deflection shutters to the main observation windows
13.
As a deflection, I asked her for an example where she did apply this principle
14.
She had no training in aerial gunnery, but she had lots of practice at rifle shooting, a sharp vision, excellent hand-eye coordination and had also listened to the best air aces of the Luftwaffe as they told her how to calculate a shooting deflection
15.
‘’While I learned basic air tactics and deflection shooting from those German aces, what helps me most to shoot down Japanese planes came from my adoptive mother
16.
amount to the gravity wave‘s deflection to the
17.
The P-38 fired three bursts in quick succession, difficult deflection shots that most pilots would have missed
18.
Anyway, the wingman of the jet that exploded turned around and came again head on against me and got shot down for his troubles, while Major Batson cut off the retreat path of the damaged jet and finished it off with frontal deflection shots
19.
Her first deflection shot was followed by a head-on shot as the Mig-15 pilot, realizing that she was after him, let go the bombers and turned towards her
20.
The torpedo is powered by a rocket engine, and in fact, it floats in a bubble which is created by the deflection, and filled with exhaust gases
21.
And, of course, the deflection
22.
One deflection would be enough time
23.
The fighters were more than likely carrying heat seeking missiles, which would be difficult to avoid unless his aircraft was equipped with automatic, anti terrorist missile deflection systems
24.
A simple deflection with his stick and a twist of his body could direct a stab meant for him into one of the other opponents
25.
such as heat, tool deflection, distortions in
26.
sorts of problems tool deflection
27.
how to avoid those deflection problems
28.
Tool Deflection and Accuracy
29.
001" of tool deflection
30.
That's what's needed to keep cutter deflection within 0
31.
your tool deflection to be half of that
32.
Effects of Climb vs Conventional Milling on Tool Deflection
33.
While we're on the subject of tool deflection and accuracy, let's consider the
34.
small arrows (often called vectors) showing the direction of tool deflection as
35.
Note how the deflection force vector is more nearly parallel to the cut with
36.
Try climb for roughing, because you can rough faster and the tool deflection
37.
should avoid too much depth of cut when climb milling lest it invite deflection
38.
The same article suggests that when deflection is to be minimized, use no
39.
kind of deflection to expect and whether it's a worry
40.
Properly factoring deflection can help you avoid the need for an extra spring
41.
Tool Deflection and Tool Life
42.
deflection as being akin to runout
43.
pushing the tooling too hard through cut deflection
44.
tool is flexing in the same direction (remember those deflection vectors from
45.
Tool Deflection and Chatter
46.
The deflection makes it act
47.
you that a tool deflection of more than 0
48.
supposed to go about dealing with tool deflection
49.
trying to determine deflection? Because of the flip side of the deflection coin,
50.
More cutting force equals more deflection, but it also
51.
measure tool deflection with the right instrumentation, but outside of a
52.
However, as we have seen above, the direction of the deflection is
53.
That brings us to calculating tool deflection
54.
of the G-Wizard Machinist's Calculator ist that it computes tool deflection as one of the many pieces of information it offers for feeds and speeds
55.
Deflection is shown right below the calculation of spindle power used in the
56.
deflection is shown in orange, which G-Wizard uses in a number of places to
57.
reduction in feedrate) that keeps the deflection within the limits you choose to
58.
Are There Rules of Thumb for Tool Deflection?
59.
thumb for estimating or avoiding tool deflection?
60.
If you don't have a deflection calculator, you're left with making the most rigid
61.
finish, chatter, or tool life become a problem, tool deflection is one thing to
62.
“I don’t know how much of this social banter is a game, or simple deflection, and so I will just come out and say that I care and reaffirm my friendship with you
63.
Optimizing Cuts for Tool Deflection
64.
or width of cut while keeping tool deflection within bounds that you've set
65.
G-Wizard's Cut Optimizer maximizes MRR while keeping tool deflection within
66.
Width, Tool Deflection, Feedrate, and Tool Stickout
67.
optimal figures with respect to material removal rates, tool deflection
68.
minimizing your tool deflection as appropriate for either roughing or finishing
69.
Breaking Cutters With Tool Deflection: An Anecdote
70.
Note the little wall caused by tool deflection (red arrow)
71.
cutter was climb milling, so as we mention above, the deflection would tend to
72.
and finish of the HSM path as well as eliminating the deflection that eventually
73.
It pays to be aware of and control your tool deflection!
74.
- No analysis of cutter deflection to help optimize your cut widths (stepover) or
75.
But you give it enough time and distance, even a mere deflection of one degree can send you light years from where you thought you would end up
76.
We know from material resistance reference books that the maximum deflection of the loaded end of a cantileve
77.
The dial sensor for measuring the said deflection should therefore be positioned on the side of the reproduction of the impact
78.
Where f max is the maximum deflection and the coefficient c can be determined using the expression:
79.
To avoid this difficulty we suggest we measure the maximum tennis racket head tip deflection from the side opposite to the collision
80.
The idea of this suggestion lies in the following: The central point of the string is being subjected to a certain load force by the tennis ball and the value of this force corresponds to the maximum deflection of the tennis racket tip point
81.
- Absorption, deflection and reflection… where and why
82.
This deflection creates a change in its direction; which creates differences in the basic structures of Energy on all levels, and in how they act and react
83.
Deflection is not randomness
84.
Every legal and social deflection is destructively used to try to make rape victims shut up and never tell anyone
85.
Sport is a deflection of hatred
86.
Historians have successfully done a very neat deflection of evading of the actual truth
87.
How have Icons, and Tokens been used destructively by humans? How has abstraction been used as a deflection from the actual truth? How has it been used to avoid actually living? How have Icons been used in order to avoid thinking? How have they been used to avoid feeling? 10,000 books could not begin to uncover the untold secret ways humans have used abstract symbols, icons, and tokens, and totems, and words, and writing, and thinking; in order avoid the truth to hide from their own sickness and their own evil
88.
It has laughed at its own sacred tokens by glorification, deflection and re-reflection
89.
It has used laughter as a deflection from actual unpleasant truth
90.
This is how the cunning deflection of greed and dishonesty works
91.
The warrior cultures of Greece was based upon the dynamics of blindness, deflection, projection and reflection
92.
Their own hate, their own cowardice, their own rape, and their own hatred for those who raped them; was deflected away from the truth by their cunning lies of reflection, deflection, and rationalization
93.
They work by the Principle and the tactic of the Deflection, the Principle of Avoidance, or the Dynamic of Deflection
94.
Myths and History are Deflections from the actual truth, they are an Avoidance of the actual truth: they work by the Deflection and Avoidance
95.
So then they elected a KING: and by that mistake, by that blunder: then even the equality of the deflection and avoidance of envy hate and fear on a basis of equality was destroyed
96.
It is a deflection so lame, so pathetic; that modern jews laugh at it
97.
The farther any deflection goes, the weaker it becomes
98.
With no deflection at all